Category: Flash Media Live Encoder

Audio/Video sync issue is common, it is mainly due to encoding hardware or software level. Now the question is how to test and make sure it is encoding hardware or software level issue or to determine it is the client side issue? FMLE has an option to record the live stream on your local encoding […]

Audio/Video SYNC Issue Open a new subscriber and verify that the problem occurs. Ensure that the CPU usage of the encoding computer and the subscriber computer is not more than 75%. Ensure that the buffer length of the subscriber is a non-zero value. A low frame rate can create a perception that video and audio […]

It is due to the AAC codec (MainConcept) installed in the encoding server. AAC codec (MainConcept) installed is a demo version. Please purchase the full version from http://www.mainconcept.com/.

How to play F4V file? The trick to play F4V file is simple, follow the below steps: 1.Record the file is FMLE using the following settings: 2.Start the FMLE, the f4v file will be saved in the specified path or by default it is saved in My Documents > My Videos   3.Download f4vpostprocessor_1_0.zip from […]

First, make sure no other application is using the device. Then, try the following: Exit Flash Media Live Encoder. Exit the device(Ex: Splitcam, Manycam..etc). Restart Flash Media Live Encoder and ensure the Video and Audio checkboxes in the Encoding Options panel are selected. Flash Media Live Encoder searches for a compatible device. Your device should […]

Verify whether FMS URL and Stream Name are entered correctly in the Flash Media Live Encoder. Make sure the Internet is proper and have enough bandwidth. If the issue still persists feel free to contact the support.

Verify that the encoding computer is connected to the network. Verify that the connection URL to the origin server is correct. Contact support and verify if publishing point and the network is intact.

Verify that the device is listed in the Device Manager and the device drivers are properly installed. Also, make sure that the device supports DirectShow.

It may be due to improper selection of audio device in the Flash Media Live Encoder. It may be due to the problem with the audio driver, please check whether the driver properly installed in the encoding server. In the case of WebLive TV please select ‘stereo mix’ in audio driver properties In the Flash […]

Learn how to configure FMLE to start live streaming